BRONZ-GLOW®

Specializing in Corrosion Control for Air Conditioning Coils,
Cabinets, Ducting, Insulation and Structural Steel, Concrete
and Other Commmercial Applications

Bronz-Glow
   
Home Products Services Tech Data / Questions Warranty Case Histories Licensing
   
   
  Bronz-Glow® F-895 & F-900 (F-895 was Pat Coat; F-900 was Tuff Coat)
Acrylic Water Based Coating
Tough, Flexible & Water Clean-Up
APPLICATION DATA
(895 & 900/5/04)
Bronz-Glow® F-895 & F-900 Product Data
Bronz-Glow® F-895 & F-900 MSDS
< Return to Products

BRONZ-GLOW F-895 IS FORMULATED FOR SPRAY APPLICATION
BRONZ-GLOW F-900 IS FORMULATED FOR ROLL, BRUSH OR DIP APPLICATION

SURFACE PREPARATION:
· Remove all traces of oils, grease, rust, dirt, and dust
· A sandblasted or rough surface improves adhesion
· Smooth metal and galvanized surfaces - Bronz-Glow F-915 Acrylic or F-250 Alkyd primer are recommended
· Rust-Oleum® brand primers are not compatible

Preparing surfaces exposed to high salt conditions
· Sandblast or wire brush metal surfaces to remove all rust and oxides
· Pressure wash with a free-rinsing, high pH cleaner - Bronz-Glow Heavy-Duty Alkaline Cleaner is recommended
· Pressure rinse with clean water
· Pressure wash to reduce surface pH to 5.0-7.0 - Bronz-Glow Heavy-Duty Acidic Cleaner is recommended
· Allow to dry thoroughly before applying

Preparing steel surfaces
· Abrasive blast steel to SSPC SP-5/NACE No. 1 or Swedish Standard Sa 3
· Prime using Bronz-Glow Primer

RECOMMENDED EQUIPMENT AND SETTINGS:
FOR ROLL, BRUSH OR DIP APPLICATION USE>   Bronz-Glow® F-900
FOR SPRAY APPLICATION USE>   Bronz-Glow® F-895
 
Conventional and Air Assist Spray Equipment
Gun:
Binks model 2001 gun or Graco model 95 gun
Nozzle: 63B
Cap: 63PB or 66SD for heavier build-up
Needle: 663A
Material: 15-25 psi
Atomization: 25-40 psi
Dilution: Not required
Clean-up: Water & mild detergent (if allowed to dry use mineral oil)

Always provide ventilation and use approved personal safety protection when handling or applying coatings.

Government Specifications:
Bronz-Glow Is Specified by numerous agencies of the U.S. government.

CONDITIONS OF USE:
Read Bronz-Glow's Condition Of Use Statement

Go To:
Bronz-Glow® F-895 & F-900 Acrylic Product Data
Bronz-Glow® F-895 & F-900 Acrylic MSDS
< Return to Products


For more detailed information call, email, or refer to our other Technical Data on this site.

Bronz-Glow, Husky & Logo are Registered Trademarks of Bronz-Glow Holdings, St. Augustine, FL

 

 

Home Products Services Tech Data / Questions
Warranty Case HistoriesLicensing
About Us Contact Us Hot Links

© Bronz-Glow Holdings 2003

 
Located in N.E. Florida
Serving Southern Georgia, Florida, Domestic U.S. & International Firms