BRONZ-GLOW®

CORROSION PROTECTION FROM: acid rain, UV, salt spray, salt air, chlorine fumes, sulfur water and most other alkali and acids

COATING RECOMMENDATIONS: Our Sea Coast Brand of coating is designed for providing corrosion protection in coastal environments. In addition to providing corrosion protection for a/c coils, it’s also very effective in providing protection for other substrates such as metal, wood and concrete (masonry) surfaces that are subjected to deterioration from their salt air and moisture laden environment.

BENEFITS:

• Provides excellent resistance to salt air corrosion, fading, and chalking
• Extends equipment life
• Aids in maintaining an a/c unit’s energy efficiency
• Reduces maintenance costs
• Can be used on most other substrates that are subject to coastal deterioration
• Safe for all non-food contact surfaces
• Easy to apply-can be sprayed, rolled or brushed (must be spray applied to coils)
• Contains a 10-year Florida sun UV inhibitor for coating preservation

DESCRIPTION: This unique air-dry coating provides excellent surface protection in salt air environments. Sea Coast is a single component coating that dries to the touch in minutes and fully cures in 24 hours. Apply by spraying, brushing, rolling or dipping. Sea Coast is available as a private label product.

AVAILABLE COLORS: C-553 Transparent Blue, C-555 Redwood, Clear

COVERAGE RATE: 200 sq/ft per gallon @ 1.5 to 2.0 mil dft (dry film thickness)
(cover rat3 may vary based on weather conditions)

PACKAGING: 5-gallon pails, 50 gallon drums

Bronz-Glow, Husky Logo is Registered Trademark of Bronz-Glow Holdings, St. Augustine, FL.
Rust-Oleum is the registered Trademark of Rust-Oleum Corporation, Vernon Hills, and IL.

Bronz-Glow’s Sea Coast Technical Data

Surface Preparation for Coils:

• Pressure wash with a high pH cleaning solution
• Rinse with fresh water
• Preasure wash with a low pH cleaning solution
• Allow to dry thoroughly
• Prime with Bronz-Glow 150 Primer
• Rust-Oleum® brand primers are not compatible

Preparing Surfaces Exposed to High Salt Conditions

• Sandblast or wire brush metal surfaces to remove all rust, oxides and loose materials
• Pressure wash with a free-rinsing, high pH cleaner
• Pressure rinse with clean water
• Pressure wash with a low pH cleaner to reduce surface pH to 5.0 to 7.0
• Allow to air dry thoroughly
• Prime with Bronz-Glow 150 Primer
• Rust-Oleum® brand primers are not compatible

Preparing Concrete Surfaces

• Clean, abrasive blast, or etch with 10 per cent muriatic acid
• Prime with Bronz-Glow 150 acrylic primer

RECOMMENDED EQUIPMENT AND SETTINGS:
Conventional and Air Assisted Spray Equipment
Gun: Binks model 2001 gun
Nozzle: 63B
Cap: 63PB or 66SD-3 for heavier build-up (Do not dilute)
Needle: 363-A
Material: 40 PSI
Atomization: 35-40 psi
Dilution: Not required
Clean up: Bronz-Glow 15 Reducer
Airless Spray Equipment
Tip Sizes: .010-.015
Pressure: As needed
Dilution: As needed
Surface Test: Painted surfaces may lift. Test a small are before applying over painted finish

For more detailed information, call, email, or visit or web site
Distributed by Bronz-Glow Technologies, Inc.
175 Bronz-Glow Way
St. Augustine, FL 32095
Ph: (904) 825-0175 or Fax: 904-825-0122
E-mail: Customerserv@bronz-glow.com or www.bronz-glow.com

Conditions of use: "The information, data contained herein, is believed to be reliable and based on our knowledge & experience; however, seller does not guarantee the result obtained by buyer. Seller herby expressly disclaims any implied warranty, of merchantability for fitness for a particular purpose and / or any other warranty expressed or implied as to any and all products and / or suggestions described herein, whether such are used alone or in conjunction with other materials. Buyer must make its own determination of suitability of any products for its use and the completeness of any information. In no event shall Bronz-Glow Technologies, Inc. Holdings Trust be liable for consequential or incidental damages"