BRONZ-GLOW®

PROTECTION FROM:  Moisture, chemicals, abrasion, punctures, insulation breakdown, fiber migration, mildew, mold, and fungus.COATING RECOMMENDATIONS:  SPC Clear is used to coat surfaces such as pre-painted metal, galvanized metal, plastic, painted steel, copper & aluminum piping, rubber, along with cement block, masonry sumps, tower basins and almost any other type of substrate material.  Priming is not required, but is recommended for increased adhesion.

COATING RECOMMENDATIONS:  Fibrous insulation, polyurethane foams, closed cell foams, acoustical panels, medical cushioning devices, athletic device cushioning, and seat cushions.  It’s an excellent product for coating HVAC/R cabinet insulation and fibrous duct board. Very Cleanable. 

BENEFITS:

• Provides moisture, chemical, abrasion, and puncture resistance
• Improves IAQ per ANSI Standard 62-2001 & OSHA 59:15968-16039
• Prevents fiber migration
• An available option for our bio-stat additive provides long-term protection
  from mold, mildew and fungus.
• Offers an economical alternative to double wall construction for HVAC equipment
• Meets fire code UL94HBF

DESCRIPTION:  This tough and durable solvent base vinyl coating is specially designed to seal fibrous insulation, un-skinned polyurethane foams, and closed cell foams. Insul-Coat can be enhanced with the addition of an anti-microbial biostat at time of application. With our biostat added, Insul-Coat provides long-term protection against the molds, mildews, and fungi that are sources of Legionella and sick building syndrome (SBS).  Exhibits very good chemical resistance to items such as: mineral oil, saline, iodine, alcohol, alkali, acids, machine oil, urea, blood, salt air and most acids (ASTM D-1308).When dry, Insul-Coat creates a protective barrier against moisture and chemical attack and provides a tough surface membrane that resists abrasion and puncture.  Insul-Coat is a cost effective replacement for **Hypalon® coating.

AVAILABLE COLORS:  Clear, C-3 Black, C-591 Light Gray

COVERAGE RATE: 80 sq. ft. per gallon @ 5 mils dft (dry film thickness)                               (cover rate may vary based on weather conditions)

PACKAGING: 5 gallon pails, 50 gallon drums

Bronz-Glow, Husky Logo is Registered Trademark of Bronz-Glow Holdings, St. Augustine, FL.
Rust-Oleum is the registered Trademark of Rust-Oleum Corporation, Vernon Hills, and IL.

Bronz-Glow’s Insul-Coat Technical Data

Surface Preparation:

All surfaces to be coated must be free of all oils, grease, wax, rust, dust, loose foam particles, and loose fibers.

Use Adequate Ventilation

THREE PART APPLICATION FOR MAXIMUM PROTECTION:
Optimum protection is achieved by applying Insul-Coat in three steps while the application is still wet. Since vinyl coatings have a tendency to coagulate during storage, the product should be properly sheered before application.

PART 1: The prime coat
The first coat primes the surface, particularly for porous applications. The spray should overlap and flow into the surface. Special attention should be paid to corners and edges.

PART 2: The seal coat
Immediately after priming, the seal coat should be sprayed on in a thinner layer than the prime coat and completely cover the surface.

PART 3: The finish coat:
The finish coat is applied immediately after the seal coat to increase the strength and durability of the entire application. The applier determines the final thickness of and texture of the finish coat.

RECOMMENDED EQUIPMENT SETTINGS:
Gun: Binks model 2001 gun
Nozzle: 63B
Cap: 66SD
Needle: 363-A
Pressure to pot: 25-30 psi
Pressure to gun: 25-40 psi
Dilution: Normally not required; If desired use Acetone up to 5%/vol.
             Proper sheering required before adjusting.
Clean-up: Acetone or Methyl Ethyl Ketone

Always provide ventilation and use approved personal safety protection
when handling or applying coatings.

For more detailed information, call, email, or visit or web site
Distributed by Bronz-Glow Technologies, Inc.
175 Bronz-Glow Way
St. Augustine, FL 32095
Ph: (904) 825-0175 or Fax: 904-825-0122
E-mail: Customerserv@bronz-glow.com or www.bronz-glow.com

Conditions of use: "The information, data contained herein, is believed to be reliable and based on our knowledge & experience; however, seller does not guarantee the result obtained by buyer. Seller herby expressly disclaims any implied warranty, of merchantability for fitness for a particular purpose and / or any other warranty expressed or implied as to any and all products and / or suggestions described herein, whether such are used alone or in conjunction with other materials. Buyer must make its own determination of suitability of any products for its use and the completeness of any information. In no event shall Bronz-Glow Technologies, Inc. Holdings Trust be liable for consequential or incidental damages"