| |
|
Bronz-Glow® Product Data
Husky® Green Fin Coil Protector
Tough, Flexible Fin Tube Coil Coating, Which Doesn’t Crack, Chip or Flake
|
< Return to Products |
CORROSION PROTECTION FROM: acids, alkalis, acid rain, chlorine fumes, salt air, salt water spray, sulfur water and most other chemical elements.
COATING RECOMMENDATION: Bronz-Glow Husky "Green-Fin" Coil Coat Protector can effectively be spray applied to the coils of condensing units, refrigeration systems, icemakers and to most any other type of fin/tube or coaxial coil. We recommend coils that are constructed with more than 2 rows of tubing in depth be dip coated. It can also be applied to aluminum, galvanized, copper or steel coils.
BENEFITS:
- Extends equipment life
- Reduces maintenance costs
- Prevents "dirty socks syndrome"
- Protects in virtually any corrosive environment
- Aids in maintaining operating efficiency (saves against unnecessary energy loss)
- Easy to apply by spray application
- In the event of damage, can be touched up with a "Green-Fin" aerosol
- Contains a 10-year Florida sun UV inhibitor for coating preservation
DESCRIPTION: ‘Green-Fin’ Coil Protector is a unique air-dry coating that provides corrosion protection in environments where traditional coil coatings fail. Formulated around a synthetic base, at 1.5 to 2_ mils dry thickness Husky® Green Fin Coil Protector provides effective corrosion protection in virtually any operating environment.
| COATING CHARACTERISTICS: |
| Solids: (wt) 17% |
Abrasion: (ASTM D-3170) |
| Tensile: 2,500 psi (ASTM D-638) |
Weather Ability: 7-10 yrs. (ASTM G-53) |
Finish: Semi-gloss
|
Temperature use range: -30° to 220° F |
| Shelf Life: 1yr.@ 77° F |
Cut Resistance: Very Good (ASTM D-1044) |
| Elongation: 500% (ASTM D-638) |
Salt Spray: 3,000 hrs (ASTM B-117.85) |
| Durometer: Shore A 70 (ASTM D-2240) |
Field Repairable |
| VOC lbs. per gallon: 5.1-5.4 |
Viscosity Range: 55-66 K.V. @ 77 deg. F. |
| Gas Chromatography Test (FID) No evidence of residual vapors |
COLOR: Olive Drab Green
ALTERNATIVE PRODUCT: Bronz-Glow Sea-Coast
Coverage Rate: 200 sq. ft./gal @ 1.5 to 2.0 dry mils dft (dry film thickness)
(cover rate may vary based on weather conditions)
PACKAGING: 5 gallon pails, 50 gallon drums, 12 aerosol cans/case
Bronz-Glow, Husky Logo is Registered Trademark of Bronz-Glow Holdings, St. Augustine, FL.
Rust-Oleum is the registered Trademark of Rust-Oleum Corporation,
Bronz-Glow’s Husky Green Fin Coil Protector Technical Data
Surface Preparation:
- Pressure rinse with a high pH cleaning solution
- Rinse with fresh water
- Pressure wash with a low pH cleaning solution to reduce surface pH to 5.0 to 7.0
- Allow to dry thoroughly
- Prime using Bronz-Glow 150 acrylic primer
Preparing Tubing Surfaces:
- Clean using solvent wipe of MEK, Toluene, Acetone or similar solvent
- Prime tubing with Bronz-Glow 150 acrylic primer
RECOMMENDED EQUIPMENT AND SETTINGS:
Conventional and Air Assisted Spray Equipment
Gun: Binks model 2001 gun
Nozzle: 63B
Cap: 63PB or 66SD-3 for heavier build-up (Do not dilute)
Needle: 363-A
Pressure to pot: 25-40 psi
Pressure to gun: 25-40 psi
Dilution: Normally not required
Clean-up: Bronz-Glow 15 Reducer
Airless Spray Equipment
Tip Sizes: .010-.015
Pressure: As needed
Dilution: Not normally required
For more detailed information, call, email, or visit or web site
Distributed by Bronz-Glow Technologies, Inc.
175 Bronz-Glow Way
St. Augustine, FL 32095
Ph: (904) 825-0175 or Fax: 904-825-0122
E-mail: Customerserv@bronz-glow.com or www.bronz-glow.com
Conditions of use: "The information, data contained herein, is believed to be reliable and based on our knowledge & experience; however, seller does not guarantee the result obtained by buyer. Seller herby expressly disclaims any implied warranty, of merchantability for fitness for a particular purpose and / or any other warranty expressed or implied as to any and all products and / or suggestions described herein, whether such are used alone or in conjunction with other materials. Buyer must make its own determination of suitability of any products for its use and the completeness of any information. In no event shall Bronz-Glow Technologies, Inc. Holdings Trust be liable for consequential or incidental damages"
|
