| |
|
Bronz-Glow® Product Data
Husky Coil Coat-Spray
Spray Coating for HVAC/R Fin Tube and Coaxial Coils
Tough Flexible Finish Will not Crack, Chip or Flake
|
< Return to Products |
CORROSION PROTECTION FROM: Operating environments containing corrosive elements such as: Salt air/spray, acid rain, hydrogen sulfide, phosphoric acid, chlorine, muriatic acid, ammonia, sulfuric acid, uric acid and most other common corrosive substances.
COATING APPLICATION: Husky Coil Coat-Spray formulation is exclusively applied by factory trained and licensed Bronz-Glow Field Spray Applicators. Our proprietary spray coating process can be applied in our N.E. Florida coating facility or field applied on location. We recommend factory application if the equipment is not already installed. The factory application is performed in a controlled environment and is not affected by adverse weather conditions.
BENEFITS:
- Provides superior resistance to chemicals, corrosion, fading, and chalking
- Extends equipment life
- Reduces maintenance costs
- Protects in virtually any environment
- Aids in maintaining operating efficiency (saves unnecessary energy loss)
- In the event of damage, may be touched up in the field
- Warranty for coil replacement and coil recoating is available
DESCRIPTION: This tough single component air-dry coating provides surface protection in harsh environments where traditional coil coatings fail. Formulated around a synthetic resin base, at 0.8 to 1.5 mils dry thickness, Husky Coil Coat provides corrosion resistance from harsh base alkaline and acidic atmospheres. Provides corrosion protection across the entire pH Range (1.0 to 14.0) will not chip, crack, powder or flake and has little effect on heat transfer. (less than _ of 1%)
| COATING CHARACTERISTICS: |
| Solids: (wt) 17% |
Stone Abrasion: Excellent (ASTMD-3170) |
| Weather ability: 7-10 yrs (ASTM G-53) |
Finish: Semi-Gloss |
Temperature use range -30° TO 220° f
|
Shelf Life: 1 yr. @ 77° F |
| Elongation: 200% (ASTM D-638) |
Dielectric Strength: 1,400/mil (ASTM D-149) |
| Cut Resistance: Excellent |
Salt Spray: 5,000 hrs (ASTM B-117.85) |
| VOC lbs. per gallon: 5.4-5.8 |
|
| All performance testing is based on average dft. (Dry film thickness) |
CHEMICAL RESISTANCE:
Petroleum: Limited Acid rain / salt air: Excellent
Sulfur water: Excellent Acids & Alkalis: Excellent
Gas Chromatography Test (FID) No evidence of residual solvent vapors
AVAILABLE COLORS: Gold or Antique Bronze by Bronz-Glow Technololgies, Inc.
Gold by Bronz-Glow Licensed Certified Applicators
Husky Coil Coat-Spray is exclusively applied by licensed Bronz-Glow Spray Coating Applicators
Bronz-Glow, Husky Logo is Registered Trademark of Bronz-Glow Holdings, St. Augustine, FL.
Rust-Oleum is the registered Trademark of Rust-Oleum Corporation
Bronz-Glow’s Husky Coil Coat-Spray Technical Data
PROPRIETARY INFORMATION
For information, call, email, or visit or web site
Distributed by Bronz-Glow Technologies, Inc.
5 Bronz-Glow Way
St. Augustine, FL 32095
Ph: (904) 825-0175 or Fax: 904-825-0122
E-mail: Customerserv@bronz-glow.com or www.bronz-glow.com
Conditions of use: "The information, data contained herein, is believed to be reliable and based on our knowledge & experience; however, seller does not guarantee the result obtained by buyer. Seller herby expressly disclaims any implied warranty, of merchantability for fitness for a particular purpose and / or any other warranty expressed or implied as to any and all products and / or suggestions described herein, whether such are used alone or in conjunction with other materials. Buyer must make its own determination of suitability of any products for its use and the completeness of any information. In no event shall Bronz-Glow Technologies, Inc. Holdings Trust be liable for consequential or incidental damages"
|
