Other Coating Needs
Does
Bronz-Glow offer more than AC coatings?
If I use Bronz-Glow's
water base coatings on a concrete surface, will it make it
slippery?
What coating will prevent the insulation on my a/c unit from
breaking down or
become saturated with moisture?
Does Bronz-Glow F-910 protect against
U.V rays for refrigerant line insulation?
Will Bronz-Glow F-855 also protect the refrigerant lines from corrosive
attack?
Can rubber or plastic products that are subject to chemical
breakdowns be coated?
Back
Q.Does Bronz-Glow offer more
than AC coatings?
A. Absolutely! Bronz-Glow has an entire line of industrial
coatings that may be used on almost any type surface. Our
single component coating systems can be sprayed, rolled or
brushed, and unlike two part coatings there are no pot life
restrictions and no waste due to over mixing or unused coating
hardening.
Q. If I use Bronz-Glow's water
base coatings on a concrete surface, will it make it slippery?
A. Anytime a coating is applied to a concrete walkway
traction can be affected. There are additives that can be
added to the coating to enhance traction for slip prevention
and to create non-skid surfaces.
Q. What coating will prevent the
insulation on my a/c unit from breaking down or
become saturated with moisture?
A. Bronz-Glow F-910 was developed to protect fibrous
insulation from deterioration and moisture absorption. It
has been used to coat insulation in cases where dual-walled
equipment had been specified. Bronz-Glow F-910 meets all required
UL fire ratings for this type use.
Q.Does Bronz-Glow F-910 protect
against U.V rays for refrigerant line insulation?
A. Yes. However Insul-Coat was developed for fibrous
insulation installed indoors. We recommend using SPC to protect
other surfaces exposed to the environment.
Back to Top
Q.Will Bronz-Glow F-855 also protect the
refrigerant lines from corrosive attack?
A. Yes. Our Bronz-Glow F-860 will protect
against a broad range of corrosives. The coating is sprayed
on at our facility or in the field by our applicators. It
is also available in bulk or in aerosol cans, to be applied
by the contractor or homeowner.
Q.Can rubber or plastic products
that are subject to chemical breakdowns be coated?
A. Bronz-Glow F-860 and Bronz-Glow F-900 688 are two
most versatile coating products. They can be applied over
rubber, canvas, plastics, wood, metal, stone work, dry wall,
and much more. Because it is flexible itself, SPC is the perfect
coating to protect these types of materials.
Top
|
